TELEROB Explosive Ordnance Disposal and observation robot
Keep a safe distance. This fundamental principle of bomb disposal technology is increasingly making the EOD robot the tool of choice of bomb disposal engineers everywhere. The telerob Explosive Ordnance Disposal and observation robot sets the standard worldwide. Robust, reliable and flexible, this pioneering bomb disposal system offers the ultimate in safety and security.
Tracked running gear & Metal track
Tracked running gear
- Low vibration
- No blurring of video image
- Reduced stress on components
Metal track
- Easier maintenance
- Reduced stretching
- Extrem durable
Optimised manipulator geometry & turret position
Optimised manipulator geometry
- Upper arm reaches ground
- Lower arm entirely used for horizontal action
- Small dimensions
Optimised turret position
- Extended front reach
- More space at rear for additional equipment
- Harmonic center of gravity
High manipulator payload & High speed axis motions
High manipulator payload
- Deployment of heavy equipment
- Deployment of powerful disruptors
- High performance reserve
High speed axis motions
- Fast TCP movement
- Reduced operating times
- Rapid task performance
Telescopic lower arm
Telescopic lower arm
- Extended overall reach
- Small transport dimensions
- Easy operation under vehicles
Overlapping turret rotation zone
Overlapping turret rotation zone
- No blind angle behind the manipulator arm
- Easier 'parking'
Automatic tool exchange
Automatic tool exchange
- Extended operational spectrum
- Enhanced flexibility
- Free programmable positions
Anti-collision capability & Safety clutches
Anti-collision capability / Safety clutches
- Prevents damage to important components due to operating errors
Variable camera lighting
Variable camera lighting
- Easy adjustments to light conditions
- No glare
Telescopic camera post
Telescopic camera post
- Enhanced point of view
- Neutral observer position
- Point of view independent of arm position
72x zoom camera
72x zoom camera
- Extrem variable field of vision
- Integrated pan and tilt head
- Similar interface to arm and telescopic post
- easy to change
Integrated cable drum
Integrated cable drum
- Safe data transmission in all conditions
- 200m extension
- Automatic wind-up
- Integrated tool magazin
tEODor - Civil Defence Geneva
Technical Data
Length / Width / Height: |
1300mm / 685mm / 1240mm |
Weight with manipulator and batteries: |
375 kg (standard configuration) |
Speed. continuously adjustable: |
3 km/h |
Climbing ability: |
45°, depending on ground and friction |
Obstacle abililty: |
250 mm |
Manipulator payload: |
up to 100 kg (depending on arm configuration) |
Towing capacity: |
300 kg |
Scope front: |
1860 mm |
Scope up: |
2860 mm |
Scope down: |
1260 mm |
Tower rotation: |
+/- 205° |
Upper arm incline: |
+ 144°, - 85° |
Lower arm incline: |
+ 110°, - 110° |
Lower arm telescopability: |
0 - 390 mm |
Gripper incline: |
+ 120°, -95° |
Gripper rotation: |
+/- endless |
Gripper open/close: |
0 - 300 mm |
Temperature Range: |
-20°C - + 60°C |
Protection Vehicle: |
IP 65 |
Proctection Control Stand: |
IP 55 |
Nominal life: |
3 - 4 hours |
Gripper force: |
600 N |
Payload: |
30 kg |
Electromagnetic compatibility: |
EN 55022 B EN 61000 - 4 part 2,3,4 and 6 |
Mobile control console
Wireless control system
- Up to 1000m distance
- Distance of data signal exceeds video signal
- Permanent security check
- Continuous revertive security protocol
Special features
- Optimised antenna design
- TFT-colour monitor
- Picture-in-picture feature
- Integrated battery charging system
Portable Control Console
Simultaneous operation of 2 joints by one joystick
Simultaneous operation of 2 joints by one joystick
- Makes operation easier
- Simple guidance to target
- Faster movements
Programmable manipulator movements
Programmable manipulator movements
- Assists operator during mission
- Automatic tool exchange
- Automatic folding/unfolding
Reverse function
Reverse function
- Changes direction of joystick action
- Makes backward driving easier
- Reduces risks of accident
4 CCD-colour cameras with integrated lights
4 CCD-colour cameras with integrated lights
- Front/rear camera, fix focus
- Gripper camera, fix focus
- Main camera, manual zoom/focus, pan and tilt
Additional cameras and sockets
Additional cameras and sockets
- 2nd main camera on telescopic mast
- X-ray port (TELEVIS)
- Auxiliary socket (e.g. aiming device)
3 ballistic channels
3 ballistic channels
- Parallel use of up to 3 shooting systems
- Electronic safety check
- 2-hand control safety feature
3 external standard connectors
3 external standard connectors
- Easy add-on of additional accessories
- Wide extension potential
Vehicle feedback
Vehicle feedback
- Batterie condition (vehicle, console)
- Gripper force
- Vehicle temperature
- Motor temperature
Fibre optics control with automatic wind-up
Fibre optics control with automatic wind-up
- Safe data transmission in difficult terrain
- Avoids damage to cable
- No catching on obstacles
Adjustments
Adjustments
- LED-brightness
- Volume of headset
Operator Support
Operator support
- Picture-in-picture function
LCD-display with menue
LCD-display with menue
- Switching of video-channels
- Status report of manipulator (grafic or digits)
- Automatic exposure of failures
- Various optional functions programmable
Technical Data
Mobile Control Console:
|
Length / Width / Height: |
440 / 220 / 230 mm |
Weight (incl. batteries): |
8 kg |
Control Stand:
|
Length / Width / Height: |
600 / 620/ 1210 mm |
Weight (incl. batteries): |
70 kg |
Portable Control Console: |
Length / Width / Height:: |
440 / 220 / 230 mm |
Weight (incl. batteries): |
8 kg |
Data transmission: |
433 MHz 80 channels |
|
more than 4000 Kanäle available |
|
Video transmission |
Industrial version with 2 reserved channels: |
2,3 GHz |
Police version with 5 reserved channels: |
2,3 GHz |
Export version with 5 reserved channels: |
1,3 GHz |
Accessories
|